• 01 CRC質量管理體系認證

  風機測試符合JB/T 10981-2010和JB/T 10562-2006國家標準的要求，風機設備連續運行24小時不損壞，長久使用壽命，節能高效（省電），為您創造利潤，節省成本。

• 02 保養操作簡單

  采用緊湊的葉輪設計結構滿足風機的高轉速運行。葉片設計風量大，延長使用壽命，降低故障頻率，模組化生產，規格統一，零配件材料齊全，可在短時間內、節約成本，快速完成安裝維修。

• 03 提供服務團隊

  1對1服務，提供到公司測量性能、震動，提供測試報告，防范故障于未然，保障風機在最佳狀況下運轉?？舍槍蛻舻奶厥庖?guī)格，量身定制設計，確保風機運轉于最高效率點。

• FT35-11型玻璃鋼軸流通風機

   FT35-11型玻璃鋼軸流通風機葉輪、外殼均采用玻璃鋼纖維和樹脂模壓制作而成。該系列風機具有結構簡單、低噪音、安裝簡便、防腐性能良好、靜壓及效率高、運轉平穩、機械振動小等特點。廣泛應用于酸洗工段、化驗室、地下室、發電廠、電鍍、氧化廠等含有腐蝕性氣體的場所使用。也適用于一般工礦企業、倉庫、辦公樓、住所等場所通風換氣使用。更可以應用于較長管道內間隔串聯安裝，用以提高管道內的壓力。所輸送氣體不允許含有粘性物質、所含粉塵及硬質顆粒s 150mg/m³、氣體溫度≤60℃、相對濕度≤100%。
  BFT35-型玻璃鋼防爆軸流通風機是根據客戶的使用條件配置EXdl或EXdll類A、B等級防爆隔離型電機制作而成?？奢斔秃屑淄?、乙烷、丙烷、苯乙烯、甲苯、二甲苯、一氧化碳、醋酸、煤油、汽油、呋喃等易燃、易爆揮發性氣體。其性能參數和安裝尺寸與FT35-11型玻璃鋼軸流通風機一致。

• FT35-ll type FRP axial fan

   The impeller and shell of FT35-lI type FRP axial fan are made of FRP fiber and resin molding. This series of fans have the characteristics of simple structure, low noise, easy installation, good anticorrosion, high static pressure and high efficiency, smooth operation and small mechanical vibration. It is widely used in acid cleaning section, laboratory, basement, power plant, electroplating, oxidation plant and other places containing corrosive gas. It also applies to ventilation and ventilation in general industrial and mining enterprises, warehouses, office buildings and domicile places. It can be used in series installation of long pipe interval to increase the pressure in the pipe. The gas is not allowed to contain viscous substances, dust and hard particles is less than or equal to 150mg/m³, the gas temperature are less than 60, the relative humidity is less than 100%.
  BFT35-lI type FRP explosion-proof axial fan is made of EXdl or EXdll class A and B grade explosion-proof isolation motor based on the customer's use conditions. It can transport inflammable and explosive volatile gases including methane, ethane, propane, styrene, toluene, xylene, carbon monoxide, acetic acid, kerosene, gasoline and furan. Its performance parameters and installation dimensions are consistent with the FT35-11 type FRP axial flow fan.

外形及安裝尺寸示意圖 Lnstallation size diagram

產品為人工實物測量會有一定誤差，一切以收到的實物為準。單位Unit: mm(毫米）