• FT30C型玻璃鋼電機外接式軸流通風機

   FT30C型玻璃鋼電機外接式軸流通風機具有結構合理、設計簡單、靜壓及效率高、防腐性能良好、噪音低、運轉平穩、機械振動小、氣流順暢等特點。該系列風機電機裝配在風機筒體上部，有可調的電機支承座板，采用角帶傳動，從而使風機所輸送的各種耐腐性氣體與電機隔離，保證電機使用壽命。風筒內采用外溝球面萬向軸承座，具有體積小、密封性能好等到優點。該系列風機主要適用于一般工業管道串聯加壓、送風及排氣使用。所輸送氣體不允許含有粘性物質、所含粉塵及硬質顆粒≤150mg/m³、氣體溫度≤60℃、相對濕度≤100%。

• FT30C type FRP axial flow fan series

   The FT30C type glass fiber reinforced plastic motor external axial flow fan has the characteristics of reasonable structure, simple design, high static pressure and efficiency, good anticorrosive performance, low noise, smooth operation, small mechanical vibration and smooth flow. The series fan motor is assembled on the upper part of the fan body, with adjustable motor supporting seat plate and angular belt drive, so that all kinds of decay resistant gas conveyed by the fan can be isolated from the motor to ensurethe service life of the motor. The outer groove spherical universal bearing seat is used in the winder, which has the advantages of small volume and good sealing performance. This series of fans are mainly applicable to the series pressurization, air supply and exhaust use of general industrial pipes. The gas is not allowed to contain viscous substances, dust and hard particles is less than or equal to 150mg/m³, the gas temperature are less than 60, the relative humidity is less than 100%.

外形及安裝尺寸示意圖 Lnstallation size diagram

產品為人工實物測量會有一定誤差，相關數據僅作參考，以收到的實物為準。單位Unit: mm(毫米）