• PP4-72C型聚丙烯離心通風機

   PP4-72C型聚丙烯離心通風機參照金屬4-72性能參數采用聚丙烯板，加熱壓模焊接而成。其廣泛應用于科研、化工、冶金、電子、醫藥、紡織、儀表、電鍍、礦山、學校酒店、賓館、實驗室、環保配套設備等行業中作通風換氣排除酸堿性等有害氣體通風之用。但不允許輸送含芳香族化合物、脂肪族與芳香族碳氫化合物的鹵素衍生物、酮類等腐蝕性氣體。具有耐化學腐蝕、不易老化、比重小、機械振動小、噪音低、運轉平穩等特點。其所輸送氣體不允許含有粘性物質、所含粉塵及硬質顆粒≤150mg/m3、氣體溫度50℃、相對濕度≤100%。且避免陽光暴曬、風機現場附近不得有熱源。

• PP4-72C polypropylene centrifugal fan series

   The PP4-72 polypropylene centrifugal fan is made of polypropylene plate and heating die according to the metal 4-72 performance parameters. It is widely used in research, chemical, metallurgy, electronics, medicine, textile, instrumentation, electroplating, mining, school hotels, hotels, laboratories, environmental protection equipment and other industries for ventilation and ventilation to eliminate harmful gases such as acid and alkali. . However, it is not allowed to transport a corrosive gas such as a halogen derivative containing an aromatic compound, an aliphatic or an aromatic hydrocarbon, or a ketone. It has the characteristics of chemical corrosion resistance, aging resistance, small specific gravity, low mechanical vibration, low noise and stable operation. The gas to be transported is not allowed to contain viscous substances, dust and hard particles ≤150mg/m3, gas temperature 50°C, relative humidity ≤100%. And avoid sun exposure, there must be no heat source near the fan site.

外形及安裝尺寸示意圖 Lnstallation size diagram

產品為人工實物測量會有一定誤差，相關數據僅作參考，以收到的實物為準。單位Unit: mm(毫米）

機 號
	進風口 Air inlet		出風口 Vent				外形尺寸 Shape size			底架尺寸 Bottom frame size
NO	Φ1	Φ2	A1	A2	B1	B2	H1	H2	L5	L1	L2	L3	L4	N
6C	375	480	410	520	464	574	645	1115	1640	920	1200	395	830	M12
7C	460	530	490	600	560	670	730	1240	1890	1075	1405	395	880	M12
8C	795	910	585	730	620	800	900	1500	2410	1130	1610	520	1130	M12
10C	960	1140	700	845	810	950	1080	1850	2520	1360	2010	540	1320	M12